METAL CLAD LSC2B
The Simoprime switchboard is a Medium Voltage switchboard type LSC2B: it is generally used for the primary distribution and has been designed to be installed in electrical installations with high power and with high values of short-circuit currents.
This type of installations requires a guarantee of maximum safety to employees, continuity of service and easy inspection and maintenance.
This type of installations requires a guarantee of maximum safety to employees, continuity of service and easy inspection and maintenance.
Built in press formed metal sheet resistant to the electrodynamics forces generated by failure currents and to overloads due to the internal arch up to 40 kA.
The switchboard can be built with either front/back access or only front. All solutions guarantee easy manageability of the switchboard by the operator in full safety.
A back-up drawer containing protection parts, signage and commands is placed in the front part. The protection level IP 2X, is guaranteed at all times.
The cable connection area is accessible from the back or the front when access is from the front. Proper mechanical interlocks ensure that doors cannot be opened if the earth switch is not off.
The main bars system is located at the top of the board and consists of electrolytic copper plates.
SPECIAL FUNCTION
Within the Simoprime switchboard, it is possible to built panes measuring 435 mm in width. This solution is extremely compact and allows optimum use of space available within the cabin.
ELECTRICAL SPECIFICATIONS
In addition, Alfaquadri is able to supply switchboard type Metaclad with rated voltage au to 36 kV starting from prebuilt solutions of the main manufactures MV equipment.
- Nominal Voltage (Un): up to 17,5 kV
- Nominal Current (In): up to 3600 A
- Current c.to c.to (Icw): up to 40 kA per 3 sec.
- Internal Arch resistance: up to 40 kA per 1 sec.
Panel size mm (LxHxP) 435/600/800x2425x1860
The switchboard is in full compliance with IEC 62271-200.
In addition, Alfaquadri is able to supply switchboard type Metaclad with rated voltage au to 36 kV starting from prebuilt solutions of the main manufactures MV equipment.
